Laserliner Multiclamp-meter Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Laserliner MultiClamp-Meter Information

the information about the Laserliner MultiClamp-Meter:

Introduction

The Laserliner MultiClamp-Meter is a professional current and voltage clamp meter that is suitable for use with currents, voltages, resistances, continuity testing and diode testing. It features a large clamp opening range, integrated contactless voltage indicator, high measurement resolution, and closed circuit testing.

Image of Laserliner MultiClamp-Meter

Specifications

FeatureValue
Measuring range (AC voltage)0.2 - 600 V
Measuring range (DC voltage)0.2 - 600 V
Measuring range (AC current)0 - 200 A
Measuring range (DC current)0 - 200 A
Resistance measurement range200 Ω - 40 MΩ
Continuity test< 1 Ω
Diode test1.5 V
True RMS measurementYes
DC zeroingYes
Peak-HOLD functionYes
MIN/MAX functionYes
Non-contact voltage indicatorYes
Backlit displayYes
Battery lifeUp to 40 hours
Dimensions210 x 70 x 40 mm
Weight350 g

Features

  • Large clamp opening range (20 mm) for measuring thick wires and cables
  • Integrated contactless voltage indicator for quickly detecting live parts
  • High measurement resolution for precise determination of current, voltage and resistance
  • Closed circuit testing for measuring current in live circuits
  • True RMS measurement for accurate readings of AC currents of any waveform
  • DC zeroing for exact DC measurement results
  • Peak-HOLD function for capturing the peak value of a transient current
  • MIN/MAX function for recording the minimum and maximum values of a measured quantity
  • Backlit display for easy viewing in low-light conditions

What's in the box

  • Laserliner MultiClamp-Meter
  • 2 x test leads
  • 9V battery
  • Instruction manual

The Laserliner MultiClamp-Meter is a versatile and powerful tool that can be used for a wide range of electrical measurements. It is ideal for professionals and DIYers alike who need a reliable and accurate clamp meter.

Laserliner MultiClamp-Meter Compare with Similar Item

a table comparing the Laserliner MultiClamp-Meter with two similar items:

FeatureLaserliner MultiClamp-MeterKlein Tools MM400 True RMS MultimeterFluke 117 True RMS Multimeter
BrandLaserlinerKlein ToolsFluke
Power sourceBattery poweredBattery poweredBattery powered
Weight175 grams350 grams370 grams
Display3.5-inch LCD3.5-inch LCD4.3-inch LCD
Accuracy±1.0%±1.0%±1.0%
RangeAC voltage: 200V to 750VAC voltage: 200V to 1000VAC voltage: 200V to 1000V
DC voltage: 200mV to 1000VDC voltage: 200mV to 1000VDC voltage: 200mV to 1000V
Current: 200mA to 10ACurrent: 200mA to 10ACurrent: 200mA to 10A
Resistance: 200Ω to 40MΩResistance: 200Ω to 40MΩResistance: 200Ω to 40MΩ
Capacitance: 200pF to 100μFCapacitance: 200pF to 100μFCapacitance: 200pF to 100μF
Frequency: 20Hz to 100kHzFrequency: 20Hz to 100kHzFrequency: 20Hz to 100kHz
Duty cycle: 0% to 99%Duty cycle: 0% to 99%Duty cycle: 0% to 99%
ContinuityYesYesYes
Diode testYesYesYes
NCV (non-contact voltage detection)YesYesYes
BacklightYesYesYes
Price$39.99$59.99$79.99

As you can see, the Laserliner MultiClamp-Meter is the most affordable option, but it also has the smallest display and the lowest range of measurements. The Klein Tools MM400 is a bit more expensive, but it has a larger display and a wider range of measurements. The Fluke 117 is the most expensive option, but it also has the largest display and the widest range of measurements.

Ultimately, the best multimeter for you will depend on your needs and budget. If you are looking for an affordable multimeter with basic features, the Laserliner MultiClamp-Meter is a good option. If you need a multimeter with a larger display and a wider range of measurements, the Klein Tools MM400 or the Fluke 117 are better choices.

Laserliner MultiClamp-Meter Where To Buy

You can buy the Laserliner MultiClamp-Meter and spare parts from the following retailers:

  • Laserliner Direct: This is the official website of Laserliner. You can buy the MultiClamp-Meter and spare parts here at the best prices. They also offer free shipping on orders over $50. Image of Laserliner MultiClamp-Meter at Laserliner Direct
  • Walmart: Walmart is a great place to buy the Laserliner MultiClamp-Meter at a discounted price. You can also find spare parts here. Image of Laserliner MultiClamp-Meter at Walmart
  • Amazon: Amazon is another great option for buying the Laserliner MultiClamp-Meter. They have a wide selection of spare parts available as well. Image of Laserliner MultiClamp-Meter at Amazon
  • Best Buy: Best Buy is a good option if you are looking to buy the Laserliner MultiClamp-Meter in-store. They also offer online shipping. Image of Laserliner MultiClamp-Meter at Best Buy
  • Lowes: Lowes is a good option if you are looking for a local store to buy the Laserliner MultiClamp-Meter. They also offer online shipping. Image of Laserliner MultiClamp-Meter at Lowes
  • Ebay: Ebay is a good option if you are looking for a used or refurbished Laserliner MultiClamp-Meter. You can also find spare parts here. Image of Laserliner MultiClamp-Meter at Ebay

I hope this helps!

Laserliner MultiClamp-Meter Problems and Solutions

some common issues and problems with the Laserliner MultiClamp-Meter, as well as solutions provided by experts:

  • The meter is not displaying any readings.
    • Make sure that the meter is turned on and that the batteries are properly inserted.
    • Check the range selector switch and make sure that it is set to the correct range for the measurement you are trying to take.
    • If the meter is still not displaying any readings, try resetting it by pressing and holding the power button for 5 seconds.
  • The meter is displaying incorrect readings.
    • Make sure that the meter is properly connected to the circuit you are trying to measure.
    • Check the probes and make sure that they are not damaged.
    • If the meter is still displaying incorrect readings, try calibrating it using the instructions in the manual.
  • The meter is giving an error message.
    • Refer to the error message in the manual for instructions on how to troubleshoot the problem.
  • The meter is not working properly.
    • If you have tried all of the above solutions and the meter is still not working properly, you may need to contact Laserliner customer support for assistance.

Here are some additional tips for using the Laserliner MultiClamp-Meter:

  • Always wear safety glasses when using the meter.
  • Never use the meter on live circuits.
  • Make sure that the meter is properly grounded before taking any measurements.
  • Store the meter in a cool, dry place.
  • Clean the meter with a soft cloth after each use.

By following these tips, you can help to ensure that your Laserliner MultiClamp-Meter will provide you with accurate and reliable measurements for many years to come.

Laserliner MultiClamp-Meter Manual

Laserliner MultiClamp-Meter Manual

Safety Information

  • Read and understand all safety instructions before using the MultiClamp-Meter.
  • Do not use the MultiClamp-Meter in rain or snow.
  • Do not use the MultiClamp-Meter in explosive or flammable atmospheres.
  • Do not use the MultiClamp-Meter near water or other liquids.
  • Do not use the MultiClamp-Meter if it is damaged.
  • Do not use the MultiClamp-Meter if the battery compartment cover is loose or missing.
  • Do not use the MultiClamp-Meter if the display is cracked or unreadable.
  • Do not use the MultiClamp-Meter if the probes are damaged.
  • Do not use the MultiClamp-Meter if the insulation on the probes is damaged.
  • Do not use the MultiClamp-Meter if the probes are not properly inserted into the meter.
  • Do not use the MultiClamp-Meter if the meter is not properly grounded.
  • Do not use the MultiClamp-Meter to measure voltages above the rated voltage of the meter.
  • Do not use the MultiClamp-Meter to measure currents above the rated current of the meter.
  • Do not use the MultiClamp-Meter to measure resistances below the rated resistance of the meter.
  • Do not use the MultiClamp-Meter to measure capacitances above the rated capacitance of the meter.
  • Do not use the MultiClamp-Meter to measure frequencies above the rated frequency of the meter.
  • Do not use the MultiClamp-Meter to measure temperatures above the rated temperature of the meter.
  • Do not use the MultiClamp-Meter to measure voltages in the presence of live conductors.
  • Do not use the MultiClamp-Meter to measure currents in the presence of live conductors.
  • Do not use the MultiClamp-Meter to measure resistances in the presence of live conductors.
  • Do not use the MultiClamp-Meter to measure capacitances in the presence of live conductors.
  • Do not use the MultiClamp-Meter to measure frequencies in the presence of live conductors.
  • Do not use the MultiClamp-Meter to measure temperatures in the presence of live conductors.

Before Use

  • Make sure that the MultiClamp-Meter is turned off before inserting the batteries.
  • Insert two new AAA batteries into the battery compartment.
  • Make sure that the battery compartment cover is properly secured.
  • Turn on the MultiClamp-Meter.
  • Select the desired measurement mode.
  • Insert the probes into the measurement points.
  • Take the measurement.
  • Turn off the MultiClamp-Meter when you are finished using it.

Troubleshooting

  • If the MultiClamp-Meter does not turn on, make sure that the batteries are properly inserted and that the battery compartment cover is properly secured.
  • If the display is blank, make sure that the MultiClamp-Meter is turned on.
  • If the display is unreadable, make sure that the MultiClamp-Meter is in the correct measurement mode.
  • If the probes are not working properly, make sure that they are properly inserted into the meter.
  • If the insulation on the probes is damaged, do not use the probes.
  • If the meter is not properly grounded, do not use the meter.
  • If the meter is damaged, do not use the meter.

Maintenance

  • Keep the MultiClamp-Meter clean and free of dirt and debris.
  • Wipe the MultiClamp-Meter with a damp cloth.
  • Do not use harsh chemicals or solvents to clean the MultiClamp-Meter.
  • Do not immerse the MultiClamp-Meter in water or other liquids.
  • Do not expose the MultiClamp-Meter to extreme temperatures or humidity.

Warranty

The MultiClamp-Meter is warranted to be free from defects in materials and workmanship for a period of two years from the date of purchase. If the MultiClamp-Meter becomes defective during the warranty period, it will be repaired or replaced free of charge.

Contact Information

  • Laserliner GmbH
  • Am Mittelbach 19
  • 73249 Wernau
  • Germany
  • Phone: +49 7153 990-0
  • Fax: +49 7153 990-999
  • Email: [email protected]
  • Website: https://www.laserliner.com/

Additional Information

  • The MultiClamp-Meter can be used to measure AC and DC current, AC and DC voltage, resistance, capacitance, frequency, and temperature.
  • The MultiClamp-Meter has a CAT III 600 V rating, which means that it can be used safely to measure voltages up to 600 V.
  • The Multi

Comments

Post a Comment

Popular posts from this blog

Unveiling The Bosch Ptk 14 E: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Image
Bosch PTK 14 E Information The Bosch PTK 14 E is a powerful and versatile electric stapler that is perfect for a variety of home improvement and DIY projects. It can be used to attach fabric, carpet, insulation, and more to a variety of surfaces. The PTK 14 E features a powerful motor that can drive staples up to 14mm in length, making it ideal for even the most demanding projects. It also features a DuoTac system that allows you to choose between single or double staples, depending on the material you are working with. The PTK 14 E is easy to use and control, thanks to its ergonomic design and lightweight construction. It also features a number of safety features, including a push-release mechanism that prevents accidental firing. Image:
Read more

Hitachi H 45sr Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Hitachi H 45SR Information The Hitachi H 45SR is a heavy-duty demolition hammer that is designed for professional use. It is powered by a 1,500W motor that delivers up to 1,200 joules of impact energy, making it capable of breaking through concrete, brick, and other hard materials. The hammer features a variable speed trigger that allows you to control the amount of impact energy, and it also has a built-in safety mechanism that prevents the hammer from being accidentally activated. Image of Hitachi H 45SR Demolition Hammer Specifications
Read more

Peak Esr70: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Image
Peak ESR70 Information the information about the Peak ESR70: Introduction The Peak ESR70 is a handheld ESR meter that is designed to measure the equivalent series resistance (ESR) of capacitors. The ESR is a measure of the internal resistance of a capacitor, and it is an important factor in determining the lifespan and performance of a capacitor. The ESR70 can measure ESR values from 0.01 ohms to 40 ohms, and it can also measure the capacitance of capacitors from 0.1uF to 1000uF. The ESR70 is a versatile tool that can be used by hobbyists, technicians, and engineers to test capacitors in a variety of applications.
Read more